Indi75 Posted July 9, 2009 Share Posted July 9, 2009 Hi, The following Quad set purchased through Scan a couple of years back seems to have given up the ghost. It's been running at 800FSB in my current system on my profile until about a month ago when the PC started BSOD's either during boot or shortly after desktop. BSOD's were all PAGE_FAULT_IN_NON_PAGED_AREA. Memtest 86+ shows multiple errors. Windows Memory Diagnostic finds multiple hardware failure. Swapped RAM with Corsair XMS2 4GB (2x2GB) DDR2 PC2-8500C5 1066MHz Dual Channel Kit which for over a week has been running fine with no issues. Placed the faulty sticks in singles and alternating pairs into a sister machine built for a colleague and the BSOD's have returned with WMD again showing hardware errors. Are these covered by Corsair? Are they RMA'able? Thanks for your help Indi Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 9, 2009 Corsair Employees Share Posted July 9, 2009 Let's get it replaced, please use the On Line RMA Request Form and we will be happy to replace it. Be sure to check the box that says “I've already spoken to Technical Support and/or RAM Guy.” Link to comment Share on other sites More sharing options...
Indi75 Posted August 1, 2009 Author Share Posted August 1, 2009 Thanks RAM GUY, I've been a bit slow getting back, but RMA request sent as requested. Thank you for your help. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 4, 2009 Corsair Employees Share Posted August 4, 2009 NP Please let me know if you have any more questions! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.