jabmem Posted July 8, 2009 Share Posted July 8, 2009 Hi, I'm doing some troubleshooting for my system and I need the settings for my Rampage Extreme II with HX3X12G1600C9 sticks and i7 950. Specifically, I need the QPI/DRAM Core Voltage and DRAM Bus Voltage Settings. There isn't much about these memory sticks in the stickies. Thanks, Link to comment Share on other sites More sharing options...
jabmem Posted July 8, 2009 Author Share Posted July 8, 2009 I did some research and found the DRAM Voltage should be 1.6V, what should the QPI Voltage be? I read in some sites it should be 0.4V from the DRAM Voltage Bus. So should it be 1.2V or should I leave it in auto? Thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 10, 2009 Corsair Employees Share Posted July 10, 2009 I would recommend that you load setup defaults in the BIOS and then enable the XMP setting. This should automatically configure your memory settings. If you would prefer to set it up manually then please set the following: Memory Voltage: 1.6v QPI Voltage: 1.35v Memory Frequency: 1600MHz TCL:9 TRCD: 9 TRP: 9 TRAS: 24 Let us know if you have any problems! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.