dthedj Posted July 7, 2009 Share Posted July 7, 2009 I'm building a new system with an ASUS P6T Deluxe V2 and a kit of 3x 2GB of TR3X6G1866C7GTF and one of the module seams to be defective. When only this module is installed in slot A1 (or B1 or C1), the system wont boot and cannot go into BIOS. When one of the other 2 modules installed alone in slot A1 (or B1 or C1) system boots normally. System also works with these 2 modules in slot A1 and B1 and when I add the defective module in slot C1, the system boots but only 4GB is recognized. Thanks in advance for your support! Link to comment Share on other sites More sharing options...
Synthohol Posted July 7, 2009 Share Posted July 7, 2009 its possible, please read this announcement. http://forum.corsair.com/v3/showthread.php?t=79691 maybe you can just run the two until the new improved version comes out? then you can RMA all 3 to get the new ones. Link to comment Share on other sites More sharing options...
Wired Posted July 7, 2009 Share Posted July 7, 2009 I would call / email into Corsair. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.