sveegaard Posted July 4, 2009 Share Posted July 4, 2009 Hi all! I want to manually set my TWIN2X2048-6400C4DHX RAM to the enhanced mode (4-4-4-12-2T) - they are installed in a ECS KA3 MVP Extreme mobo and I need all info about how to configure it (the mobo is not as highquality as I once expected). The settings in question are: TwTr Command delay Row Refresh cycle time (Trfc0 to Trfc3) Write recovery time (I believe this is supposed to be 8T) Row precharge time (Trtp) Row cycle time (I believe this is supposed to be 22) RAS to CAS delay (I believe this is supposed to be 4) RAS to RAS delay RAS Precharge delay (Trp) (I believe this is supposed to be 4) Active to precharge delay (Tras) (I believe this is supposed to be 12) I have tried to change all the values I know of, but then my computer won't even boot and I have to reset BIOS. Thanks in advance Link to comment Share on other sites More sharing options...
Wired Posted July 4, 2009 Share Posted July 4, 2009 What's the memory voltage at? Link to comment Share on other sites More sharing options...
sveegaard Posted July 5, 2009 Author Share Posted July 5, 2009 At this moment, they're at 1.9 V (1.8 + 0.1 volt suggested by the mobo), but they - of course - have to be at 2.1 volt in enhanced mode. I have tried that setting, too. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.