vmgc009 Posted July 3, 2009 Share Posted July 3, 2009 Dear Friends, I've tried several configurations, reading your excellent forum trying to get to 1066 on the P5B with no luck... Any suggestions, I'm not an expert overclocker... just want a stable configuration with my new memory... Then I'm planning to upgrade my processor to E8400. Many Thanks in Advance from Chile! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 6, 2009 Corsair Employees Share Posted July 6, 2009 I am sorry but that MB does not support DDR1066 memory with out over clocking. You are welcome to try it and see with the latest BIOS it may let you set it to DDR1066 depending on the CPU FSB. Link to comment Share on other sites More sharing options...
vmgc009 Posted July 7, 2009 Author Share Posted July 7, 2009 Dr. Mr Ram Guy and Friends, After some tests I've could to obtain 3.0Ghz, very stable. The only thing I've let the TWIN2X4096-8500C5G to DDR667, is that a problem? Let me give you some details extracted from Everest, CPIUD and Orthos. Core Voltage 1.320 V Mem Voltage 2.1 V DRAM Freq: 333.4Mhz Latency: 5-5-5-15-2T Multiplier x9.0 DRAM:FSB Ratio 1:1 Temperature (after a couple of hours using regularly) MB:32C Processor: 32C Core1: 36C Core2: 33C Any suggestions, comments will be highly appreciated Rgds Víctor Gallardo Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.