marioana Posted July 2, 2009 Share Posted July 2, 2009 I am trying to connect the ATX_12V_2X4 power connector but the form of the pins do not match the ones from the motherboard. The pins are numbered 1 to 4 the row below, and 5 to 8 the row above. Pins 7,8, 3 and 4 match the form, but 1, 2, 5 and 6 are all with corners cut, while 2 of them should be square (1 and 6), not with the corners cut. Am i missing something? Why is the form of the pins different? Link to comment Share on other sites More sharing options...
Wired Posted July 2, 2009 Share Posted July 2, 2009 Max compatibility. They'll still only fit in one way and in one connector. If they fit, you've done it right :) Link to comment Share on other sites More sharing options...
marioana Posted July 3, 2009 Author Share Posted July 3, 2009 well, it made the click so I guess it's ok. Thank you :). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.