Jump to content
Corsair Community

TWINX XMS4000PT question


Recommended Posts

just got a gig of these, but i have a question if anyone could possibly answer it rev.1 of this memory had 4ns ram (whether black or platinum heatspreaders), the ones i got are rev.2.1, do they still carry the same chips? if so, what changes were made to warrant a change in revision number? if not, what kind of chips were used in rev. 2.1? thanks.
Link to comment
Share on other sites

[quote name='RAM GUY']Hynix IC's rate their IC's by speed, so a D43 would be 433 Mhz and D5 would be 500 Mhz. We are currantly use Sansung Rev F -5 with this module Rev 2.1, and Hynix D5 Rev C for XMS4400.[/QUOTE] so does that mean that rev.2.1 are using 5ns ram rather than 4ns ram? i know samsung ram performs pretty high, at least their 2700's performed well back in the day, how high have you seen these modules go at 2.85volts? i'm running a p4p800-dx, currently at 250mhz with a 2.6c, but i wouldnt mind going higher. thanks.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...