Borgu Posted June 16, 2009 Share Posted June 16, 2009 Hi, I just built a new machine. I can get two of the 2gig chips installed and working. The Bios didn't recognize the clock speed and latency so I set those manually to 1333MHz and 9-9-9-24. When I put the 3rd chip in the Bios won't post. All I get is the 'Phase LED' lit on the motherboard and it just hangs. Any ideas? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted June 16, 2009 Corsair Employees Share Posted June 16, 2009 Please test the modules one at a time and do you have the latest MB BIOS installed? Link to comment Share on other sites More sharing options...
Borgu Posted June 17, 2009 Author Share Posted June 17, 2009 I had a bad stick. The other two sticks worked fine, when I put the third in by itself or in any combination of the other two chips it wouldn't post. I bought a new set of Ram and it worked. I'll RMA the old set and be in business. Thanks! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted June 17, 2009 Corsair Employees Share Posted June 17, 2009 Let's get them replaced, please use the On Line RMA Request Form and we will be happy to replace them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.