Necroraven Posted June 15, 2009 Share Posted June 15, 2009 Hi I have MSi K9A2 CF and i just brought a TWIN2X2048-8500C5D Dominator, and i want to know witch is the best configuration. Im noob in this ****, so plase be nice. Thks! EDIT: I Have change my motherboard is not the ine that I put before. Link to comment Share on other sites More sharing options...
Wired Posted June 15, 2009 Share Posted June 15, 2009 Please don't double post. The other thread has been removed. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted June 15, 2009 Corsair Employees Share Posted June 15, 2009 You can get the tested settings from the link in my signature and with that MB and CPU I would set the memory frequency at DDR800 and over clock the CPU to get the full speed of the memory. Link to comment Share on other sites More sharing options...
Necroraven Posted June 16, 2009 Author Share Posted June 16, 2009 Sorry about that my mother its K9a2 cf ... i was wrong. I dont understand so plase be more explicative... Link to comment Share on other sites More sharing options...
Necroraven Posted June 16, 2009 Author Share Posted June 16, 2009 I have a K9A2 CF and a TWIN2X4096-8500C5D and Iput all the thing like you say 5-5-5-15 but look at this... This have to be working at 22 trc and it workin at 42 , and TRaS have to be working at 15 and is working at 29... IT this ok????? http://img19.imageshack.us/img19/5885/cpuzw.jpg Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted June 16, 2009 Corsair Employees Share Posted June 16, 2009 If the system is stable then yes that is fine, but I would suspect the MB BIOS may need to be updated if this is the settings you have to run at. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.