Jump to content
Corsair Community

Asus Maximus II Formula & TWIN2X4096-8500C5DF Settings


etniesrit

Recommended Posts

  • Corsair Employees
You can get the tested settings from the link in my signature just amke sure that you have the latest BIOS then load setup defaults with only one set installed and then set the tested settings IE: DDR1066 at Cas 5-5-5-15 2T Command Rate 2.1 Volts.
Link to comment
Share on other sites

  • 3 months later...
You can get the tested settings from the link in my signature just amke sure that you have the latest BIOS then load setup defaults with only one set installed and then set the tested settings IE: DDR1066 at Cas 5-5-5-15 2T Command Rate 2.1 Volts.

 

Hi,

this MB supports 2 pairs of memories = 8GB? (4X2048)

Thank you

Link to comment
Share on other sites

  • Corsair Employees
With 4 modules I would suggest setting the memory frequency at DDR667 or DDR800 and set the memory Voltage to 2.1 Volts and set the NB/MCH/SPP Voltage to +.2 Volts as well and test the system with http://www.memtest.org. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...