Stanman67 Posted June 5, 2009 Share Posted June 5, 2009 I am having problems in the above MOBO running with all 4 slots filled. I orginally had 2X1G corsair value select 400MHZ DC and it worked fine. I decided to fit 512MHZ X2 into the other slot and with a power down and cmos reset it worked fine but win7 would onlu use 2gig but saw the three. I have now bought another 2 gig of corsair value seelect bit the system will only post with 3 gig. For same reason it will not post with the mem slot further from the CPU filled with the other1 gig slot. Link to comment Share on other sites More sharing options...
Stanman67 Posted June 5, 2009 Author Share Posted June 5, 2009 I am having problems in the above MOBO running with all 4 slots filled. I orginally had 2X1G corsair value select 400MHZ DC and it worked fine. I decided to fit 512MHZ X2 into the other slot and with a power down and cmos reset it worked fine but win7 would onlu use 2gig but saw the three. I have now bought another 2 gig of corsair value seelect bit the system will only post with 3 gig. For same reason it will not post with the mem slot further from the CPU filled with the other1 gig slot. Some pics of CPU readings http://i120.photobucket.com/albums/o169/Stanman_Photoman/cache.jpg http://i120.photobucket.com/albums/o169/Stanman_Photoman/Mainboard.jpg http://i120.photobucket.com/albums/o169/Stanman_Photoman/Memorysettings.jpg http://i120.photobucket.com/albums/o169/Stanman_Photoman/Memorysettings2.jpg http://i120.photobucket.com/albums/o169/Stanman_Photoman/Processor.jpg Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted June 9, 2009 Corsair Employees Share Posted June 9, 2009 With 4 modules I would suggest setting the memory frequency DDR333 and set the memory Voltage to 2.75 Volts at Cas 2.5-3-3-7 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.