corneliustacitu Posted May 22, 2009 Share Posted May 22, 2009 Hello, I have a Asus P5K-E WI-FI AP MB and Intel E6750 proc running Vista 64b. I use 2x1 Gb Corsair XMS2 memory, everything is fine for now. But when I try to upgrade with another 2x1Gb but Corsair Dominator with the same timing the sistem freeze during POST with the message "Initializing USB controllers". I try to use only Dominator or to increase DRAM voltage to 2,2V but is the some problem. Can You please tell me what bios settings I must use for this Corsair Dominator: CORSAIR Dominator 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Is there any posibilities that this memory will not work on my system? The settings recommended by Specmike also dont work. Thank you Link to comment Share on other sites More sharing options...
Yellowbeard Posted May 22, 2009 Share Posted May 22, 2009 Please list ALL of the information from the stickers on both sets of memory you have. Link to comment Share on other sites More sharing options...
corneliustacitu Posted May 22, 2009 Author Share Posted May 22, 2009 1 pair DOMINATOR: CM2X1024-8500C5D, XMS2-8500, 1024MB, 1066MHz, 5-5-5-15, 2,10V, Ver 1.5, and also a number:08522570 1 pair XMS2: CM2X1024-8500C5, XMS2-8500, 1024MB, 1066MHz, 5-5-5-15, 2,10V, Ver 2.1, and numbers 1678649 07373923 Thank you, Link to comment Share on other sites More sharing options...
Wired Posted May 22, 2009 Share Posted May 22, 2009 Thread split; DIFFERENT issue from OP. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.