Fanti Posted May 22, 2009 Share Posted May 22, 2009 Hi all, I have a big question i would like to know how set up my BIOS Motherboard: ASUS P5K Ram: TWIN2X4096-8500C5D i would like to know how works 1066MHZ without frozen what i need to setup in my BIOS. Thank you :$ Link to comment Share on other sites More sharing options...
Yellowbeard Posted May 22, 2009 Share Posted May 22, 2009 Set the memory voltage to 2.1v. Set the memory controller / NB voltage to 1.4v. Set the memory frequency manually to 1066. Link to comment Share on other sites More sharing options...
Yellowbeard Posted May 22, 2009 Share Posted May 22, 2009 Mixing 2 different versions of the memory is not advised and may be the source of your instability. Ideally, you need a 2 x 2GB kit of memory for stable operation since you do not have 4 matched modules. Link to comment Share on other sites More sharing options...
corneliustacitu Posted May 22, 2009 Share Posted May 22, 2009 Thank you, I agree with that, but why I cannot start only with Dominator pair? Link to comment Share on other sites More sharing options...
Yellowbeard Posted May 22, 2009 Share Posted May 22, 2009 Did you try clearing the BIOS each time you changed memory modules? Link to comment Share on other sites More sharing options...
corneliustacitu Posted May 22, 2009 Share Posted May 22, 2009 Only with Dominator pair, after clearing BIOS with jumper..."No video input":(: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.