Jump to content
Corsair Community

Hydrocool'd 2.8C SL6Z5 fun :)


eva2000

Recommended Posts

eva2000, Is this the same MOBO (AI7) with the socket turned at a 45 angle? Did you figure out how to mount the cold-block to it? Any pictures? ALSO, outstanding to see that you can raise the 2.8 up to 3.9 Ghz. Awesome with the HC! About 1Ghz increase ! Stev
Link to comment
Share on other sites

yeah same AI7 with 45 degree angle cpu socket... HC200 block fits fine with no probs and covers entire heatspreader. Good thing about the angled bracket is that when removing coldblock the cpu is stuck to the block .... normally i'd have to rip out the cpu! But because the AI7 angled bracket allows a bit of room, what i do is get a small coin and place it between the space of the block and the cpu's green pcb and slight push up the coin and it frees the cpu from the block without ripping the cpu out of the locked socket! got the pics up [url]http://www.fileshosts.com/pentium4/D1/abit/AI7/HC200_AI7/[/url] Yup 1.1ghz oc and best of all ambient temp is 28-32C and cpu idle 2.8C@3.9ghz is 40-42C!
Link to comment
Share on other sites

eva2000, Ok, you have convinced me. When I start building a new system, that board, ABIT AI7 would be a very sweet choice indeed! :D: I touched up the Memtest86 photos using MS-PhotoEditor. Load the file, then > Image > Autobalance. This had really enhanced the ability to read all of those great numbers! :sunglasse Stev
Link to comment
Share on other sites

:cool: Hydrocool really knows how to keep a cpu cool :) here's at stock vcore 2.8C @ 3500mhz idle temps [IMG]http://www.fileshosts.com/pentium4/D1/abit/AI7/results/2.8C_SL6Z5_B542/HC200/kingston/khx3200k2/2x256/pair9/NB800/250-200-2226-SEAED-1.55-3.2-1.65/cpuz_idle.jpg[/IMG] Priming at the 5hr + mark [IMG]http://www.fileshosts.com/pentium4/D1/abit/AI7/results/2.8C_SL6Z5_B542/HC200/kingston/khx3200k2/2x256/pair9/NB800/250-200-2226-SEAED-1.55-3.2-1.65/prime95_4_5hr_mark.jpg[/IMG] After stopping prime at 5hr 37min mark [IMG]http://www.fileshosts.com/pentium4/D1/abit/AI7/results/2.8C_SL6Z5_B542/HC200/kingston/khx3200k2/2x256/pair9/NB800/250-200-2226-SEAED-1.55-3.2-1.65/prime95_5hrs37min.jpg[/IMG]
Link to comment
Share on other sites

[quote name='PopCorn']I'm going to be ordering a H.C. ex 200 in about 2 weeks. I was ready to do it from the reviews I've read, but Eva, you've pretty much sealed it for me. :) Thanks for the info. :cool:[/QUOTE] :sunglasse Have fun :)
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...