Jump to content
Corsair Community

K8T NEO-FIS2R and 2x CMX512R-3200C2


LoKiGER

Recommended Posts

Hey there. I have problems with my K8T NEO-FIS2R and two modules CMX512R-3200C2: I can't boot my PC with bots modules installed but the PC works fine with only one of the modules installed. Now I want to know wheter the TWINX1024-3200LL will work or not. And I really want to be sure since both CMX512R-3200C2 modules installed doesn't work. Cheers ~Stefan~
Link to comment
Share on other sites

Well actually the RAM IS unbuffered (Sorry - my fault). The RAM I have is 2x CMX512-3200C2. But that doesn't change the fact that I can't use BOTH modules at the same time - the system doesn't boot. Is that normal? Will it really boot and work with TWINX1024-3200LL? Cheers ~Stefan~
Link to comment
Share on other sites

  • Corsair Employees
They should not be a problem, as long as they are exactly the same part. Both revioson and part#. In addition, Twinx1024-3200XX would be suggested with this MB. And you would want to use slots 1-3 and with 2 single modules the suggested settings would be Cass 2.5-3-3-7.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...