Jump to content
Corsair Community

Need help with extra memory timing parameters


Recommended Posts

I am getting ready to set my Gigabyte GA-M57SLI-S4 MB to run with my TWIN2X2048-6400C4DHX memory and there are a few parameters I am unsure about. If I set 4-4-4-12-2T, what do I set these to?


TwTr command delay

Trfc0 DIMM1

Trfc0 DIMM2

Precharge time (this is not Row precharge time, a separate parameter)

Row Cycle Time

RAS to RAS delay


At the default 5-5-5-18-2T setting, the MB sets the above parameters to 3T, 105ns, 75ns, 2T, 23T, 3T



Link to comment
Share on other sites

  • Corsair Employees
Te other settings are Chipset specific settings and I would just use the default settings, so load setup defaults and then set the timings as listed and leave any setting not listed and default.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...