Rock142 Posted April 20, 2004 Share Posted April 20, 2004 I have 1G of XMS 3200C2 Pro, I adusted the timings to 2-3-3-6 & the ddr voltage to 2.65...My question is I have my CPU 3.2c 800FSB @ default settings, can I leave it at that default FSB or should I pump it up since I adjusted the Memory timings? Specs Below :confused: ASUS P4C800-E w/ latest Bios 1016 P4 3.2 @ 800FSB Corsair PC3200 C2 Pro 1G @ 2 3 3 6 2 Segate SATA 120's in RAID 0 on Intel ICH5R Controller 2 MAXTORS DiamondPlus 9 120's in RAID 0 on Promise Fast Trak Controller AUSUS GeForce FX 5900 ultra @ 256MB ASUS 52/24/52 Burner TDK 440N DVD-+RW ANTEC PlusView 1000AMG case PC power & cooling Turbo 510 PSU Matrix Orbital MX2 LCD Display WinXP Pro w/ SP1 Link to comment Share on other sites More sharing options...
CandyKid Posted April 21, 2004 Share Posted April 21, 2004 Well... overclock at your own risk! If you want to, go for it, if not, don't. End of story. As always, though, check the memory integrity with [url=www.memtest86.com]Memtest86[/url] as you SLOWLY increase the FSB. Also keep in mind that your CPU doen't overclock very well due to the high & locked multiplier, but you can probably get a few more MHz on the FSB. Also, I'd take the DDR Voltage to 2.7x volts if I was going to OC. PLUR CK Link to comment Share on other sites More sharing options...
Rock142 Posted April 21, 2004 Author Share Posted April 21, 2004 Thanks CandyKid........I think I'll leave the cpu as is and still keep th mem. timing at 2-3-3-6 with 2.6v :): Link to comment Share on other sites More sharing options...
CandyKid Posted April 21, 2004 Share Posted April 21, 2004 Enjoy! PLUR CK Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.