Intel DX48BT2 and TW3X4G1333C9 G

[Paulo Sergio]

I am needing to put the manual especification for this memory for making it work on 1333 on the above motherboard. I have TCL 9, TRCD 9, TRP 9, TRASmin 24, TRFFC 33? TRRD 4? TWR 8? TWTR 4? TRTP 4? Comand rate 2T. What is wrong?

[DerekT]

Download Memtest86+ V2.11 from--->

Here

and extract the ISO image. Burn the ISO image to an CD-ROM disk.

Download CPU-z from

Here

.

Enter your BIOS and load setup defaults. Save setup defaults and enter these values:

Performance

Processor Multiplier = 9
Half Ratio Multiplier = Disabled

Host Clock Frequency Override = Manual
x Host Clock Frequency (Mhz) = 333

Memory Configuration

Reference Frequency = 333
Memory Frequency = 1333

tCL = 9
tRCD=  9
tRP = 9
tRASmin = 24
tRFC = 80
tRRD = 4
tWR = 10
tWTR = 5
tRTP = 5
Memory Voltage = 1.7v
MCH voltage = 1.30v
Command Rate 2T

Boot to the Memtest CD and allow for two full passes. Then, if stable, enter Windows and run CPU-z. Post screenshots of CPU-z's CPU, Memory and SPD tabs.