PaaDii Posted April 24, 2009 Share Posted April 24, 2009 I have just now installed the HX620w, no problems during the installation. When I try to boot up my system I cant get a signal to my screen, first thoughs were faulty graphiccard but it works flawlessly on a different system. The rest of the system boot aswell, I can even hear the windows loginsound in the end. Is there a difference where you insert the PCI-e cord in the PSU, there is two connectors. Anyone got any ideas? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 24, 2009 Corsair Employees Share Posted April 24, 2009 Is there a difference where you insert the PCI-e cord in the PSU, there is two connectors. Should not make a difference. Since you have another system available, I would test the PSU in that system and see if you have the same problems. If you can duplicate the same problems in the other system then we would want to replace the PSU for you, however if the PSU works without any problems, then there is likely some other issue. Link to comment Share on other sites More sharing options...
PaaDii Posted April 24, 2009 Author Share Posted April 24, 2009 I would test the PSU in that system and see if you have the same problems. Done, same deal. Everything except PCI-e card powering up. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 25, 2009 Corsair Employees Share Posted April 25, 2009 Done, same deal. Everything except PCI-e card powering up. Let's get it replaced, please use the On Line RMA Request Form and we will be happy to replace it. Be sure to check the box that says “I've already spoken to Technical Support and/or RAM Guy.” Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.