Jump to content
Corsair Community

TwinX 3200C2 Pro>Asus P4C800-E>DDR Volt.

Recommended Posts

Can someone help?.......I have 1G of TwinX 3200C2 Pro.....Ive disabled the timing by SPD and set the Latency to 2-3-3-6..( which I'm reading that it could support these timings on the Intel platform).my question is should I leave the DDR reference voltage to Auto or should I change it to 2.65v? the system has been running stable at auto or is there an advantage to setting at 2.65v? My specs below...... ASUS P4C800-E w/ latest Bios 1016 P4 3.2 @ 800FSB Corsair PC3200 C2 Pro 1G @ 2 3 3 6? 2 Segate SATA 120's in RAID 0 on Intel ICH5R Controller 2 MAXTORS DiamondPlus 9 120's in RAID 0 on Promise Fast Trak Controller AUSUS GeForce FX 5900 ultra @ 256MB ASUS 52/24/52 Burner TDK 440N DVD-+RW ANTEC PlusView 1000AMG case PC power & cooling Turbo 510 PSU Matrix Orbital MX2 LCD Display WinXP Pro w/ SP1 :confused:
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...