X_Fighter Posted April 4, 2009 Share Posted April 4, 2009 My mobo is ASUS Striker II Formula (BIOS v2001) before it had 2gb (2x1gb) later I bought 4gb (2x2gb) but since then had appeared a lot of problems as a BSOD windows freeze etc, etc that is some problem of compatibility with my mobo ?? what it is that I can make??? Sorry for my bad English. Thanks Link to comment Share on other sites More sharing options...
Th3_uN1Qu3 Posted April 4, 2009 Share Posted April 4, 2009 You'll have to tweak your BIOS. First of all, do you use a 64-bit operating system? If you don't, running over 4GB is pointless as it will only recognize 3.25-3.5GB depending on your system configuration. Assuming you do run 64-bit, first run with only the 4GB kit to make sure they are not defective. Also make sure you have set the correct voltages and timings (specified on the memory sticks) in the BIOS. If you don't know where they are, check your mobo manual for details on how to set them. Link to comment Share on other sites More sharing options...
X_Fighter Posted April 4, 2009 Author Share Posted April 4, 2009 I found something in memories the Kit 2x1Gb 2.20V Ver 1.2 and the Kit 2x2Gb 2.10V Ver 1.0 This is the cause for the problems?? Link to comment Share on other sites More sharing options...
X_Fighter Posted April 4, 2009 Author Share Posted April 4, 2009 Ok I think that I discovered the problem I put in one slotA1 1GB (2.20V Ver 1.2) and in the second slotA2 2GB (2.10 Ver 1.0) and appeared the famous screen (BSOD) If I wrong what I said correct me:D: Link to comment Share on other sites More sharing options...
Wired Posted April 4, 2009 Share Posted April 4, 2009 Mixing memory of different size / versions / voltages / ICs (the memory chips) is never recommended. Try 800 @ 2.1 or 2.2v. May work, may not. Link to comment Share on other sites More sharing options...
X_Fighter Posted April 4, 2009 Author Share Posted April 4, 2009 until now the system is ok in BIOS I put 2.20 for the memory voltage one more question in Everest memory Bechmark my memory appears SINGLE CHANNEL :sigh!: I Think it will be DUAL CHANNEL not SINGLE Link to comment Share on other sites More sharing options...
Th3_uN1Qu3 Posted April 5, 2009 Share Posted April 5, 2009 one more question in Everest memory Bechmark my memory appears SINGLE CHANNEL :sigh!: I Think it will be DUAL CHANNEL not SINGLE You didn't put it in the right slots. Same capacity modules go into same color slots. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.