UntameD Posted April 4, 2009 Share Posted April 4, 2009 Hi im having compat issues with these two products, basically i put the ram in the dimm slots and the computer boots but my screen stays on stand by? Ive seen the other post bout this http://www.asktheramguy.com/v3/showthread.php?t=77276&highlight=xfx+750i and its says it works when mine doesnt. HELP !!!!! :confused: UntameD Link to comment Share on other sites More sharing options...
Wired Posted April 4, 2009 Share Posted April 4, 2009 Have you tried one stick at a time? Link to comment Share on other sites More sharing options...
UntameD Posted April 4, 2009 Author Share Posted April 4, 2009 yes i have and still no joy was thinkin power shortage as my psu is only 550watt with 41amp rail but my friend said should be ample amount. Link to comment Share on other sites More sharing options...
DerekT Posted April 6, 2009 Share Posted April 6, 2009 Can you try some other memory? If you try other memory and it still does not work (Which attempting two single modules also does not work) then you have isolated the memory from the issue. Link to comment Share on other sites More sharing options...
UntameD Posted April 7, 2009 Author Share Posted April 7, 2009 Ive been running it with with my old ram from my last build which works fine and has done 4 a while now, i jus wanted better performance. and the compatiblity should be fine. hmmm supposing dead ram? im gettin it tested in 2 days so hopefully it'll come good. its the twin2x2048-8500c5d g so duno if thatll make a diff? Link to comment Share on other sites More sharing options...
UntameD Posted April 10, 2009 Author Share Posted April 10, 2009 found the problem need 2 change the dram speed and 1 of the sticks is dead so need 2 do an rma for the set. how do i go bout it? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 13, 2009 Corsair Employees Share Posted April 13, 2009 Let's get them replaced, please use the On Line RMA Request Form and we will be happy to replace them. Link to comment Share on other sites More sharing options...
UntameD Posted April 13, 2009 Author Share Posted April 13, 2009 should i send them both back or just the 1 stick wit dont work? bit of a daft question but i dnt know XD Link to comment Share on other sites More sharing options...
Glamdrain Posted April 13, 2009 Share Posted April 13, 2009 I have a 750A SLI with both sticks of memory my monitor stays in sleep and when I use one it works fine, for some reason the other stick doesnt work as a single module or as a pair. So, in short, one works fine, the other one doesnt work at all. I dont think it is bad memory. Link to comment Share on other sites More sharing options...
Glamdrain Posted April 13, 2009 Share Posted April 13, 2009 So ya mine is doing the exact same thing ...I had some OCZ that did the same thing Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 14, 2009 Corsair Employees Share Posted April 14, 2009 You will want to get the set replaced. Link to comment Share on other sites More sharing options...
UntameD Posted April 14, 2009 Author Share Posted April 14, 2009 ok ty 4 ur help ill get the set replaced and see how it goes. thanks UntameD Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 14, 2009 Corsair Employees Share Posted April 14, 2009 NP and yes please do let me know! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.