Wakwak455 Posted March 31, 2009 Share Posted March 31, 2009 Hey guys I play a lot of online gaming cod 4 and cod waw in particular. I just want to know which is a better settings of the 2 in online gaming? The 1t @ 1866mhz or the 2t @ 2000mhz? Thanks. Link to comment Share on other sites More sharing options...
Daedalus685 Posted March 31, 2009 Share Posted March 31, 2009 Generally I'd say the 1T. Not enough of an overclock to surpace 1T.. But that of course is all relative.. except for benchmarking the bandwidth of the memory I doubt you could tell a difference in FPS, even when BMing a game. Link to comment Share on other sites More sharing options...
Wakwak455 Posted March 31, 2009 Author Share Posted March 31, 2009 Wow that's really a super fast reply!! Thanks! Link to comment Share on other sites More sharing options...
DerekT Posted April 1, 2009 Share Posted April 1, 2009 When you are up in the rarefied air of system speed that you are, the differences in actual program use becomes a diminishing return. Much money spent on differences that are not that marked. I would go with the 1T over 2T for "Snappiness" over "Theoretical Bandwidth" with a good enthusiast system. You however, have 2 X GTX 295 in SLi and now one has to look at the possibility of bandwidth saturation when gaming. You need to test your system, but I personally would go with the 2000Mhz on your system. What voltage is your QPI set to? Please post your BIOS settings using this template. AI overclock - Manual OC from CPU level Up - ___________ OC from Memory level Up - ___________ AI Overclock Tuner - Manual CPU Ratio setting - ___________ CPU Configuration CPU Ratio Setting - ___________ C1E Support - ___________ Hardware Prefetcher - ___________ Adjacent Cache Line Prefetcher - ___________ Intel Virtualization Tech - ___________ CPU TM Function - ___________ Execute Disabled bit - ___________ Intel HT Technology - ___________ Active Processor Cores - All A20M - Enable Intel Speedstep Tech - ___________ Intel Turbo Mode tech - ___________ Intel C-STATE tech - ___________ BCLK Frequency - ___________ PCIE Frequency - ___________ DRAM Frequency - ___________ UCLK Frequency - ___________ QPI Frequency - ___________ Dram timing control: 1st Information x-x-x-x-x-x-x-x-x-x DRAM CAS# Latency - ___________ DRAM RAS# to CAS# Delay - ___________ DRAM RAS# PRE Time - ___________ DRAM RAS# ACT Time - ___________ All the Rest to Auto EPU II Phase Control - ___________ Load-line Calibration - ___________ CPU Differential Amplitude - ___________ Extreme OV - Disabled Voltages Cpu Voltage - ___________ CPU PLL Voltage - ___________ QPI-Dram Voltage - ___________ IOH Voltage - ___________ IOH PCIE Voltage - ___________ ICH Voltage - ___________ ICH PCIE Voltage - ___________ DRAM Bus Voltage - DRAM REF Voltage - ___________ CPU Spread Spectrum - ___________ PCIE Spectrum - ___________ CPU Clock Skew - Auto IOH Slock Skew - Auto Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.