Azrael2009 Posted March 29, 2009 Share Posted March 29, 2009 Hi ! I've a problem with kit TR3X6G1333C9G ( 6GB of DDR3 1333 RAM ) :(: After BIOS upgrade of my motherboard ( now version 302 ) the system recognize the amount of 6 GB of RAM but at 667 Mhz and not at 1333 Mhz. CPU-Z v1.50 show this for every slot : http://img167.imageshack.us/img167/3387/cpuz1.jpg I've forced in BIOS configuration the following parameter : Ai Overclock Tuner : X.M.P. BCLK Frequency : 133 PCIE Frequency : 100 DRAM Frequency : DDR3-1333 Mhz UCLK Frequency : 2666 Mhz DRAM Cas# Latency : 9 DRAM Ras# to Cas# Delay : 9 DRAM Ras# PRE Time : 9 DRAM Ras# ACT Time : 24 ..but nothing change !!! Help me please :brick: !!! Link to comment Share on other sites More sharing options...
DerekT Posted March 29, 2009 Share Posted March 29, 2009 That's not the correct page. Look at the memory tab and multiply the memory speed by 2 = DDR. Link to comment Share on other sites More sharing options...
Azrael2009 Posted March 29, 2009 Author Share Posted March 29, 2009 That's not the correct page. Look at the memory tab and multiply the memory speed by 2 = DDR. Ok ... I've 680 Mhz....:D: Thanks DerekT. Link to comment Share on other sites More sharing options...
DerekT Posted March 29, 2009 Share Posted March 29, 2009 Sure thing :): Ok ... I've 680 Mhz....:D: Thanks DerekT. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.