RaiM Posted March 21, 2009 Share Posted March 21, 2009 Hi, need help setting up the asus p6t bios for corsair product# CM3X2G1600C9D6, I cannot find these type of RAM anywhere on the net. Thx in advance Link to comment Share on other sites More sharing options...
DerekT Posted March 21, 2009 Share Posted March 21, 2009 Enter BIOS and set the memory to XMP. http://i259.photobucket.com/albums/hh293/DerekT2008/bios_select.jpg Link to comment Share on other sites More sharing options...
RaiM Posted March 21, 2009 Author Share Posted March 21, 2009 thanks for the quick reply derekt Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 23, 2009 Corsair Employees Share Posted March 23, 2009 Hi, need help setting up the asus p6t bios for corsair product# CM3X2G1600C9D6, I cannot find these type of RAM anywhere on the net. Thx in advance Keep in mind that this memory is not sold to end users and is sold only to OEMs and SIs. Where did you buy this memory? Link to comment Share on other sites More sharing options...
RaiM Posted March 23, 2009 Author Share Posted March 23, 2009 i got them from cyberpowerpc. okay now i have set it to xmp and i saw the BCLK frequency :133, PCIE Frequency :100, DRAM frequency: DDR3-1600 QPI/DRAM Bus voltage is set to 1.35, and DRAM bus voltage 1.60. cas :9-9-9-24. are they correct? thanks again in advance Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 24, 2009 Corsair Employees Share Posted March 24, 2009 Memory Voltage should be 1.65 Volts but if the system is stable 1.60 Volts is fine. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 27, 2011 Corsair Employees Share Posted April 27, 2011 You will need to be using a newer MB Core I7 with an X58 chipset for these modules but you can try and set the timing manually to whats specked on the label but the system may need a bit more voltage for the memory and memory controller to run on that MB and you will need to be running a 1333FSB CPU. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.