Jump to content
Corsair Community

A7N8XdL Rev.2.0 &TwinX1024-3200C2P,FSB 196?


welzer

Recommended Posts

A7N8X de Luxe Rev. 2.0 Athlon 3200XP TwinX1024-3200C2PT Radeon 9600pro Antec Sonata 380W With Biossettings auto, fsb200,timings 3-3-3-8, my machine crashes after 5 minutes. Running memtest, seperatly, dual, gives many errors. Recommended settings 2,5-3-3-6, no post. I have to clear CMOS. After trying and testing for weeks I decreased fsb to 196 and everything works well, even memtest no errors for hours. I had the same problem with cheap Twinmos modules, that's why I bought this expensive 3200C2PT. But until now no FSB 200MHz. I think I have a bad pair of modules. I know the Asusboard is very tricky, but all I want is a stable system without o.c. Any help and suggestions are welcome.
Link to comment
Share on other sites

  • Corsair Employees
There should not be any problem at Cass 2.5-3-3-6 as long as you have a 200 FSB CPU. We can try replacing your modules if you like. Please follow the link in my signature for the RMA. However, I would suggest testing in another system, if possible!
Link to comment
Share on other sites

Thanks for your quick response. Today I read the thread of DoMA. Before sending back my sticks, I am gone try these settings. B.t.w. when I look at Corsairspecifications, it looks like I have 3200C modules. Their timings are what I see in my bios. (8-3-3-3). I'll let you know if it works.
Link to comment
Share on other sites

I tried the settings you supposed. Cass. 2,5-3-3-6. 2,7V. Memtest, after 1 hour no errors, and I was beginning to hope everything was ok now. Pass. 4 test 5 after 2 hours, nothing but errors. Temp. CPU. 42 C, mobo 38 C. Tried all possible Cass. settings. No succes. Only stable with FSB 196MHz.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...