Jump to content
Corsair Community

Twin2x4096-8500C5DF, Asus Maximus 2 Formula


Figback65

Recommended Posts

Upon Bootup the external LCD sticks to "DET_RAM" explained in the book its detecting the ram. I tried to change the settings in the bios for this ram but not all the settings I have been asked to change are available to be changed. I was able to adjust 1st timings to 5 5 5 15 but I need to turn certain things off auto or to specific speed settings to open up other options in other places. Could you please post a setting list for this combo? Currently the system will not even run with both sticks of ram only 1. I will be running a bootable memory test on both sticks when I can get back on-site.

Thank you.

Link to comment
Share on other sites

  • Corsair Employees

You can detailed settings from the link in my signature and please make sure that you have the latest bios and load setup defaults and then set the memory Voltage to 2.1 Volts then set the timings manually to the tested settings for the specific module you have, and test the modules one at a time with http://www.memtest.org to be sure one is not failing. If you still get errors, please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! However, if you get errors with both modules that would suggest some other problem and I would test them in another system or MB to be sure. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test.

.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...