Jump to content
Corsair Community

TWIN2X4096-8500C7 compatibility


TomH

Recommended Posts

Hi

 

I've just built a new system comprising of AMD PhenomII 940 BE, Asus M3A79T Deluxe and 4 GB of Corsair TWIN2X4096-8500C7, the problem is that I can only get the RAM to run at 800Mhz instead of 1066Mhz, tried changing it in the bios to 533Mhz but in CPu-Z it then says 267Mhz and FSB:DRAM 3:4.

Any help would be appreciated.

 

Tom

Link to comment
Share on other sites

I see what you mean, sorry about the confusion, the options that I have in the bios are memory clock mode, auto, 400, 533, 667, 800, 1067 and DRAM timing mode, the only thing that I changed was clock mode to 533Mhz, hope this helps.

 

Tom

Link to comment
Share on other sites

Thanks, ok I set the clock frequency in the bios to 1067Mhz and in CPU-Z memory tab it now shows as, DRAM frequency 535Mhz and the FSB:DRAM as 3:8, does that sound about right?

 

Tom

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...