ulisses Posted April 16, 2004 Share Posted April 16, 2004 Hi, Running in Abit IC7-G, P4 2.8C @ 3080mhz (220/66/33), is these settings good: TWINX1024-3200C2 DRAM Ratio: 5:4 DDR Voltage: 2.6v Timing: CAS - 2 Act to Precharge delay - 6 Ras to CAS - 3 Ras Precharge - 3 When I set to BY SPD the CAS goes to 3, why ? Is the Voltage correct ? Thanks, Ulisses Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 16, 2004 Corsair Employees Share Posted April 16, 2004 That would be correct for the settings. And the SPD is set to JEDEC defined values or Cass 3-3-3-8 if it’s Rev 3.1 and the suggested settings would be Cass 2.5-3-3-6 at DDR400. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.