Jump to content
Corsair Community

MSI P45 Platinum HC running 2 pairs of TWIN2X4096-8500C5D


Sirswift93

Recommended Posts

Hi,

 

I am trying to run a stable board using the MSI P45 Platinum HC motherboard running 4UP CM2X2048-8500C5D modules. I can't even get th board stable using 2 sticks! It will only run 800mhz in dual mode. Once I change the settings (bios won't auto detect and set to 1066) to 1066 the board freezes on ram check. I know I can't run 1066 in 4up but if I can't even run a stable board at 2up where am I going?

 

I am running a Q9300 cpu with the latest bios version 1.5.

 

Can someone help me with the best settings for 2up and 4up? If I get both running stable I will come to a decission on which to use.

 

Thanks,

 

Howard

Link to comment
Share on other sites

  • Corsair Employees
With 4 modules I would suggest setting the memory frequency at DDR667 or DDR800 and set the memory Voltage to 2.1 Volts and set the NB/MCH/SPP Voltage to +.2 Volts as well and test the system with http://www.memtest.org. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...