Jump to content
Corsair Community

timings


bratboy

Recommended Posts

Timings would be the same 8-8-8-24 but you would need to increase the QPI voltage to anywhere from 1.5v to 1.65v. I would recommend keeping the BCLK frequency at 133MHz unless you want to overclock a 920 or 940 processor. With the BCLK set to 133MHz you can simply just adjust the Memory Multiplier frequency to 2000MHz.

 

If you have issues please create a thread, so the forum staff can monitor it better. I only recommend posting settings request or if you have any comments here. We will most likely not be posting any setting screenshots for GT products at the moment. Some boards may not be able to hit 2000MHz at this current time.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...