Jump to content
Corsair Community

twin2x2048-6400c4


rc3291

Recommended Posts

Just received a set of the memory in the subject line. I already have another set of the same memory I have been using for almost 2 years.Computer will boot but immediately locks when Windows opens with all four sticks installed. Removed one of the new sticks and the same thing happens.Removed the one new stick and swapped it with the other and computer booted and ran for a few minutes then locked. Any suggestions on troubleshooting this further.
Link to comment
Share on other sites

  • Corsair Employees
With 4 modules I would suggest setting the memory frequency at DDR667 and set the memory Voltage to 2.1 Volts and set the NB/MCH/SPP Voltage to +.2 Volts as well and test the system with http://www.memtest.org. In addition, with some MB's (Mostly ASUS) you have to disable legacy USB in the bios when running any memory test.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...