deeram1 Posted February 18, 2009 Share Posted February 18, 2009 Hi RAMGUY What are the voltage tolerances of 12v , 5v & 3.3v sources on 750 How far below 12v is within tolerance & how far above as not to burn up my hardware. % above & below @ IDLE, & Prime 100% load? Basically, what should my 12v be reading @ idle & at 100% prime? 1.2v + or - on a 12v line is 10%, what percent above & below is this 750 supposed to be at idle to be within tolerance? What % is acceptable? & SAFE!! on all 3 volt lines. thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 18, 2009 Corsair Employees Share Posted February 18, 2009 I'll try to find the links but, all of this is covered in detail in the TX-750 reviews at [H]OCP and jonnyGURU. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 18, 2009 Corsair Employees Share Posted February 18, 2009 In the sticky above for reviews, you'll find the links: http://www.houseofhelp.com/forums/showthread.php?t=52612 Link to comment Share on other sites More sharing options...
deeram1 Posted February 18, 2009 Author Share Posted February 18, 2009 thank you Mr RAM GUY Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 18, 2009 Corsair Employees Share Posted February 18, 2009 Found it! Section 3.2.1 All rails should be within 5% of its rated value. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.