Jump to content
Corsair Community

Ga K8n Pro Also


Zebulon53

Recommended Posts

Greetings, I am running a GA K8N PRO with latest updated bios. AMD Athalon 64 3400+ Corsair TWINX1024-3200LL I have been having many checksum errors on this machine. I have ran two different mem test on it including memtest86. Both tests have shown memory errors. Is this a setting in bios or compatability issue? I have looked in the bios to see if I could change the "cass" latency but have seen only one change i can do to the mem in the bios and that is voltage. Any ideas? Thanks
Link to comment
Share on other sites

  • Corsair Employees
Please test the modules one at a time with [url]www.memtest86.com[/url] and let's make sure one is not failing. In addition, you will want to install them in slots 1-3 and set the Dim Voltage to 2.7 Volts or +.2 Volts!
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...