SlayVus Posted February 13, 2009 Share Posted February 13, 2009 But all it did was do a quickie on/off when I pressed the power button. I unplugged the HX and plugged in my Antec 850w and it wouldn't turn on my system either after it had been powering it just 5 minutes earlier. What happened? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 13, 2009 Corsair Employees Share Posted February 13, 2009 Could be a short or a grounding issue. I would get the system down to a single memory module, CPU, motherboard, PSU, and video card, and see if you still have the problem. Link to comment Share on other sites More sharing options...
SlayVus Posted February 13, 2009 Author Share Posted February 13, 2009 I figured out what the problem was. My own damn fault is what it was. What happened was while I was resleeving my PSU wires I had placed a few of the wires back improperly. Pins 11-23 and 12-24 got swapped. My motherboard is dead so I am RMAing it and I am also going to buy a new one. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 13, 2009 Corsair Employees Share Posted February 13, 2009 That would explain it, let us know if you have any more problems! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.