vertigo_122001 Posted April 14, 2004 Share Posted April 14, 2004 i have a stick of CMX512 3200C2PT memory with a lat of 2-3-3-6. I'm looking for another to go with it to run in dual channel mode, however i can only find sticks with a lat of 2-3-3-61T. Are those two compatable and if so do the volts have to match as well? i have a 1.2 and im having trouble finding another one of those as well. what can i do? VERTiGO Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 14, 2004 Corsair Employees Share Posted April 14, 2004 I would try and match what you have now. Rev 1.2 is still floating arround. Or try and find another use for this module and just get a Twinx1024-3200LL Link to comment Share on other sites More sharing options...
vertigo_122001 Posted April 14, 2004 Author Share Posted April 14, 2004 so there is a difference between 2-3-3-6 and 2-3-3-61T??? what is Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 14, 2004 Corsair Employees Share Posted April 14, 2004 No there is no difference in the timings you gave. Just to run dual channel you need to match the modules you use! Link to comment Share on other sites More sharing options...
vertigo_122001 Posted April 14, 2004 Author Share Posted April 14, 2004 ok thanks!! but ive been reading other forums and some of them say you can change the volts if that is true can i get a 2-3-3-6 stick with a different volt then change it in bios when i install them??? if not ill jsut get the twinx. thansk again Kevin Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 14, 2004 Corsair Employees Share Posted April 14, 2004 I am not quite sure what you are trying to ask. However, max supported voltage on all of our DDR modules up to XMS3700 would be 2.8 Volts! Link to comment Share on other sites More sharing options...
vertigo_122001 Posted April 15, 2004 Author Share Posted April 15, 2004 ok thanks for all the help! Kevin Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.