Jump to content
Corsair Community

Blank Screen on Intel D915PCY with 4GB


Recommended Posts

I'm getting a blank screen when maxed to 4GB. Works with 3GB(single channel mode). Tried pulling battery from bios and have the latest bios version. What can I do to make it work with 4GB?:sigh!:


Intel D915PCY LGA 775 Intel 915P ATX Intel Motherboard

ATI Radeon X800XL 256MB 256-bit GDDR3 PCI Express x16

Intel Pentium 4 560J Prescott 3.6GHz LGA 775 Single-Core

APEVIA 550W ATX12V v2.03 Power Supply

Link to comment
Share on other sites


On the stick: CM2X1024-8500C5D VER1.5

I bought 2 sets of 2 x 1GB = 4GB


I looked in the bios setup and found


chipset configuration

there is a burn-in mode


SDRAM control with options



manual-user defined

SDRAM Frequency (533)

SDRAM tCL - CAS Latency (4.0)

SDRAM tRCD - RAS-to-CAS Delay (4)

SDRAM tRP - RAS Pre-charge (4)

SDRAM tRASmin - RAS Activate-to-Precharge Min (12)

There is also a CPC Override


I couldn't find anything for memory voltage.


Link to comment
Share on other sites

Hate to say it, but I used the corsair's memory configurator to buy this memory. The memory is non-returnable.:mad: So does corsair trade memory for the one's that will work for my mb? If not does anybody know of a place I can trade memory?


I did another memory search on their website and found a different outcome. Now it tells me DDR2-533/DDR2-667. Interesting.

Link to comment
Share on other sites

  • Corsair Employees

I am sorry but this motherboard has never been validated to run any XMS or OCing type memory due to the lack of voltage adjustments in the BIOS.


Here is the result from our memory finder:




We cannot offer an exchange as we did not sell the memory. Have you asked your retailer to assist you?

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...