Jump to content
Corsair Community

Asus P5Q3 Deluxe and CM3X2G1600C9DHX


Enrico

Recommended Posts

Hello.

 

My name is Enrico.

 

First off al sorry for my bad english.

 

It is stable but also verry verry slow i think.

Cpu is running at 1333mhz 8.5 multiplier standard.

 

this al is verry slow the ram timming settings are on auto 9.9.9.25

 

I would like to ask some help with overclocing to 1600, i tried alot off settings and had no succes.

 

If someone needs any kind off info to help just ask me what info you need i wil get it.

 

I hope someone can help me.

 

Thx in advance.

Link to comment
Share on other sites

Hello RAM GUY.

 

Thank you for the quick respond.

 

I dit read the manual and also went to the corsair site to see what timming to try out.

 

FSB Frequency: 333

PCIE Frequency: 100

FSB Strap To North Bridge: 333

DRAM Frequency: DDR3_1333

CAS Latency: 9

DRAM RAS to CAS Delay: 9

DRAM RAS Precharge: 9

DRAM RAS Activate to Precharge: 24

Row Refresh Cycle Time: 74 or 88

DRAM Static Read Control : Disabled

DRAM Dynamic Write Control : Disabled

DRAM Read Training : Disabled

DRAM Write Training : Disabled

MEM. OC Charger : Enabled

Ai Clock Twister : Lighter or strong

DRAM Voltage: 1.8

Load-Line Calibration: Disable

CPU Margin Enhancement: Performance Mode

 

Stable verry slow.

 

FSB Frequency: 333

PCIE Frequency: 100

FSB Strap To North Bridge: 333

DRAM Frequency: DDR3_1333

CAS Latency: 8

DRAM RAS to CAS Delay: 8

DRAM RAS Precharge: 8

DRAM RAS Activate to Precharge: 24

Row Refresh Cycle Time: 72 or 88

DRAM Static Read Control : Disabled

DRAM Dynamic Write Control : Disabled

DRAM Read Training : Disabled

DRAM Write Training : Disabled

MEM. OC Charger : Enabled

Ai Clock Twister : Lighter or strong

DRAM Voltage: 1.8

Load-Line Calibration: Disable

CPU Margin Enhancement: Performance Mode

 

Stable litle faster.

 

Lower is not posible yet.

 

1600MHz.

 

standard 9-9-9-24 at 1600MHz freece.

8-8-8-24 at 1600MHz freece bsod.

 

FSB Frequency: 400

PCIE Frequency: 100

FSB Strap To North Bridge: 333 or 400

DRAM Frequency: DDR3_1600 or 1601

CAS Latency: 9

DRAM RAS to CAS Delay: 9

DRAM RAS Precharge: 9

DRAM RAS Activate to Precharge: 24

Row Refresh Cycle Time: 74 or 88

DRAM Static Read Control : Disabled

DRAM Dynamic Write Control : Disabled

DRAM Read Training : Disabled

DRAM Write Training : Disabled

MEM. OC Charger : Enabled

Ai Clock Twister : Lighter or strong

DRAM Voltage: 1.8

Load-Line Calibration: Disable

CPU Margin Enhancement: Performance Mode

 

freeces constantly and saying bios oc fail.

 

FSB Frequency: 400

PCIE Frequency: 100

FSB Strap To North Bridge: 333 or 400

DRAM Frequency: DDR3_1600 or 1601

CAS Latency: 8

DRAM RAS to CAS Delay: 8

DRAM RAS Precharge: 8

DRAM RAS Activate to Precharge: 24

Row Refresh Cycle Time: 72 or 88

DRAM Static Read Control : Disabled

DRAM Dynamic Write Control : Disabled

DRAM Read Training : Disabled

DRAM Write Training : Disabled

MEM. OC Charger : Enabled

Ai Clock Twister : Lighter or strong

DRAM Voltage: 1.8 or 1.9

Load-Line Calibration: Disable

CPU Margin Enhancement: Performance Mode

 

Freece and bsod.

 

I dit try alot of other settings at 1600 can't seem to get i right because i am not an advanced oc.:):

 

Other sugestions?

 

I want to try other settings buth don't know what to try now.

 

And would like to see a litle more speed as it is.

I stil try to run 1600.

 

Thx in advance.

Link to comment
Share on other sites

  • Corsair Employees

The settings in the data sheet are the tested stable settings. I don't suggest different settings as they have not been tested and validated as being stable.

 

What speed or performance are you not satisfied with? How are you measuring this?

Link to comment
Share on other sites

Hello thx again.

 

I know they are not tested buth what do you do if it is not working at recemanded speed, you try it out.

That is what i do. :roll:

 

Oke i use everest ultimate,cpu-z, PC-MARK vantage, 3DMark vantage for benchmark, orthos, CPUStabTest and memtest for stability.

 

I am trying to find out how to upload a picture of the tools with the benches and show it to you.

 

1333MHz Auto

 

FSB Frequency: 333

PCIE Frequency: 100

FSB Strap To North Bridge: 333

DRAM Frequency: DDR3_1333

DRAM Timming: Auto It is what everest and bios says

CAS Latency: 9 = Auto

DRAM RAS to CAS Delay: 9 = AUTO

DRAM RAS Precharge: 9 + AUTO

DRAM RAS Activate to Precharge: 25 = AUTO

Row Refresh Cycle Time: AUTO

DRAM Static Read Control : AUTO

DRAM Dynamic Write Control : AUTO

DRAM Read Training : AUTO

DRAM Write Training : AUTO

MEM. OC Charger : AUTO

Ai Clock Twister : AUTO

DRAM Voltage: 1.8

Load-Line Calibration: Disable

CPU Margin Enhancement: Performance Mode

 

http://www.asktheramguy.com/v3/picture.php?albumid=17&pictureid=108

 

1333MHz my input in bios.

 

FSB Frequency: 333

PCIE Frequency: 100

FSB Strap To North Bridge: 333

DRAM Frequency: DDR3_1333

DRAM Timming: Manual

CAS Latency: 9

DRAM RAS to CAS Delay: 9

DRAM RAS Precharge: 9

DRAM RAS Activate to Precharge: 24

Row Refresh Cycle Time: AUTO

DRAM Static Read Control : AUTO

DRAM Dynamic Write Control : AUTO

DRAM Read Training : AUTO

DRAM Write Training : AUTO

MEM. OC Charger : AUTO

Ai Clock Twister : AUTO

DRAM Voltage: 1.8

Load-Line Calibration: Disable

CPU Margin Enhancement: Performance Mode

 

http://www.asktheramguy.com/v3/picture.php?albumid=17&pictureid=109

 

@1600MHz

 

mostly i dont have a change to benche.

I wil set it now on 1600 with recemanded settings 9-9-9-24-1.8v and try to benche.

 

I think it is slow because it is rated to 60ms to 70ms.

 

 

 

Thx.

Link to comment
Share on other sites

Hello RAMGUY.

 

I can run it on 1600MHz.

 

After some bsod's and freezes.

 

1600MHz my input in bios.

 

FSB Frequency: 400

PCIE Frequency: 100

FSB Strap To North Bridge: 400

DRAM Frequency: DDR3_1600

DRAM Timming: Manual

CAS Latency: 9

DRAM RAS to CAS Delay: 9

DRAM RAS Precharge: 9

DRAM RAS Activate to Precharge: 24

Row Refresh Cycle Time: AUTO

DRAM Static Read Control : AUTO

DRAM Dynamic Write Control : AUTO

DRAM Read Training : AUTO

DRAM Write Training : AUTO

MEM. OC Charger : AUTO

Ai Clock Twister : AUTO

DRAM Voltage: 1.8

Load-Line Calibration: Disable

CPU Spread Spectrum: Disable

PCIE Spread Spectrum: Disable

CPU Margin Enhancement: Performance Mode

 

http://www.asktheramguy.com/v3/picture.php?albumid=17&pictureid=110

 

Going to test with PCMark Vantage.

This gave me freezes.

wish me luck.

Link to comment
Share on other sites

Hello DerekT.

 

The first link works great second link i can't open it.:o:

Why, i dont know.

I dit read the first one and wil do some oc testing.;):

There are some things i dit not try out yet so maybe it is still possible.

Like i sead i am not an advanced oc so any advice is welcome here.

I would like to keep al components alive because this pc costed alot of money.

Just the ram 280 euro.

 

At the moment the system is even unstable at the orange slot at 1333MHz.

Black slot are even worse.

Il try to get this stable an try go further from this.

 

If i have any result ill wil post them here.

 

Thx.

 

Edit.

Second link is open it was my firewal blokking it.

Now i am gone read more and see where we get.

 

Thx again.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...