Jump to content
Corsair Community



Recommended Posts

I can't speak for that particular model, but most Corsair PSU's have an 8-pin connector that can be "snapped" apart with a small tab that you press down, to split four of the pins off into the four pin connector that you need. If it does not, you can simply insert the 8-pin connector onto the 4-pin jack: the holes are keyed so you can't put the wrong pins in, just line them up and make sure nothing on the motherboard is going to make contact before putting the connector in.


Hope this helps you!

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...