linuxwarz Posted January 17, 2009 Share Posted January 17, 2009 Memory: http://www.corsair.com/_datasheets/TR3X6G1600C8D.pdf I booted my fresh build today and ran the bios update. I set all of the memory settings to their respective values and noticed that no matter what, CPUZ and memtest report it running at a very slow 700mhz. Is there something wrong or am I reading it wrong? Link to comment Share on other sites More sharing options...
Legend Posted January 17, 2009 Share Posted January 17, 2009 I would make sure you have the latest Bios. The early bios revisions of this board had issues overclocking over 1333MHz when you are using a 920 or 940 processor. Download from their direct site here: http://www.evga.com/forums/tm.asp?m=701080 Link to comment Share on other sites More sharing options...
linuxwarz Posted January 17, 2009 Author Share Posted January 17, 2009 I would make sure you have the latest Bios. The early bios revisions of this board had issues overclocking over 1333MHz when you are using a 920 or 940 processor. Download from their direct site here: http://www.evga.com/forums/tm.asp?m=701080 I have updated to it before I noticed these issues. Below are screen shots from eleet and CPUZ. Maybe I am misunderstanding the numbers? http://linuxwarz.com/1.jpg http://linuxwarz.com/2.jpg Link to comment Share on other sites More sharing options...
Wired Posted January 18, 2009 Share Posted January 18, 2009 800x2=1600, it's running fine. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.