Jump to content
Corsair Community

EVGA 750i SLi, EVGA 9800 GTX+ and TWIN2X4096-8500C5


Recommended Posts

I'm currently running this combination and I'm wondering if they are in fact stable together. As of right now it doesn't seem completely compatible as often when I game I experience fatal errors which usually describe the problem as the "memory was not able to be 'read'" included with the memory address location/range. I haven't checked to see if the location is consistent with each error, but I plan on doing a memtest after this post to see if that range is the problem.


I just did a search and there are two EVGA 750is, I'm using the 123-YW-E175-A1 model. Memory settings are currently at 1066MHz, 5-5-5-15-2T timing and 2.2V. FSB is at 1.2V as well, all others are at default settings. I received advice from the EVGA forums since it was telling me that it was a video driver error but now it's telling me that the memory can't be read so I figured I'd hop here to see what you guys think. I'll post how the memtest went when I check them tomorrow morning.



Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...