Jump to content
Corsair Community

CM2X1024-6400 memtest86+ v2.10 errors


dnoiz

Recommended Posts

Hello,

 

I have a pair that is giving me problems. I just ran memtest86+ v2.10 and I get errors in test 6. Is this good enough to start an RMA procedure?

 

I have a pair which runs fine and I want to add another pair so I have a total of 4x1Gb. It is this second pair that gives errors in memtest86+.

 

EDIT: when I remove the old pair and leave only the new pair, the errors don't occur, do I need anything special to make 4x1 Gb work on a Asus P5B Deluxe / Wifi board ?

 

Any advice? Thanks.

 

r.

Link to comment
Share on other sites

I found a post here that mentioned to try DDR667 @ 5-5-5-18, so I tried it out. Seems to solve the problem. DDR667 is even a good setting as I've been using that up to now to set my Q6600 @ 3Ghz. A mild OC :).

 

So now I'm back @ 3Ghz with FSB @ 333Mhz and 4-4-4-12 @ 1.9v for the 4 memory modules. Running memtest86+ and no errors.

 

How many passes of memtest86+ are advised to ensure correct opertation?

 

r.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...