Jump to content
Corsair Community

Twin2X2048-6400C4D memtest error


parw

Recommended Posts

I hava a Twin2X2048-6400C4D module that is giving me an error in Memtest86+ (v2.01) during test #2 (Moving inversions, ones & zeros). I have a total of four sticks but I have isolated the stick that's giving me problems. Normally I have the default voltage and speed (i.e.1.8V and 5-5-5-18) but I have also tested the stick on faster settings (2.1V and 4-4-4-12) but I always see the same problem (see attached image). The serial number on the stick is acct70103161. What to do? I bought the module when I lived in Australia, but I currently live in Sweden.

PC131202.thumb.jpg.56ced48e1411889f23ae69e809b3ddfc.jpg

Link to comment
Share on other sites

  • Corsair Employees

Let's get the pair replaced, please use the On Line RMA Request Form and we will be happy to replace them. Be sure to check the box that says “I've already spoken to Technical Support and/or RAM Guy.”

 

You should be able to distinguish which modules are paired up together by matching up the revision number, or the first 4 digits of the lot code. Let us know if you have any questions!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...