Jump to content
Corsair Community

P5QC + TWIN2x2048-8500C5D


LUCiFFER

Recommended Posts

Hi all.

In capability list this memory exist,

but it doesn't work.

 

I manually change DRAM voltage to 2.1v but it doesn't help.

 

I have another memory PC2 800 Mhz, it's work with P5QC.

 

Any ideas?

 

Can you explain what you mean when you say it does not help? Will the system POST at all?

 

Try clearing the CMOS, reboot and set the memory voltage manually to 2.1v, disable legacy USB support, and test each module individually for 3-5 passes each with Memtest.

 

http://www.memtest.org

Link to comment
Share on other sites

Hi all!

I have problem with setup of this configuration.

 

I insert memory in black slots, and it's doesn't help.

No post, no boot, nothing

When i changed memory to DDR2 PC677 Mhz, it began to work perfectly.

With this memory(PC677) I manually change NVRAM voltage to 2.1v,

then reboot, change memory to Corsair TWIN, boot and it doesn't start.

 

Any ideas?

 

Thanks in advice.

Link to comment
Share on other sites

Hi all!

I have problem with setup of this configuration.

 

I insert memory in black slots, and it's doesn't help.

No post, no boot, nothing

When i changed memory to DDR2 PC677 Mhz, it began to work perfectly.

With this memory(PC677) I manually change NVRAM voltage to 2.1v,

then reboot, change memory to Corsair TWIN, boot and it doesn't start.

 

Any ideas?

 

Thanks in advice.

Please do not double post.

 

Can you try the memory in another known working system.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...