tskeeter Posted April 8, 2004 Share Posted April 8, 2004 I built a new system with Intel D875PBZ mb, 3g cpu, twinx 1024-3200C2PT mem, the spd is set to auto. I get 1 or 2 beeps at post. I do not get any errors running memtest86 & I have the latest bios update installed. Any ideas why it doesn't post correctly? Steve. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 8, 2004 Corsair Employees Share Posted April 8, 2004 SO? The system will post if you use other memory and set the timings manually or ???? Link to comment Share on other sites More sharing options...
tskeeter Posted April 8, 2004 Author Share Posted April 8, 2004 I don't have any other DDR memory to try so I haven't try other memory in the system. I was wondering what is causing the post errors. The computer seems to run fine. Steve. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 8, 2004 Corsair Employees Share Posted April 8, 2004 Steve, I am sorry I don’t understand! Will the system post and run or pass [url]www.memtest86.com?[/url] When you get these beeps; does the system still post and run normally? If the answer is yes to both questions, I would test the modules in another MB. Or you might try setting the timings manually to Cass 2-3-3-6 and set the Dim Voltage to 2.7 Volts as well if you have the option to set the Dim Voltage! In addition, if you have USB devices connected, you might try and disconnect them and see if that does not solve the issue. I would also suggest that you get the latest bios and well, if you have not done so! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.