Jump to content
Corsair Community

Twin2x2048-8500C5d on N650SLI-DS4 mobo


Recommended Posts

I recently bought these awsome new RAMs and when i went into my bios to set up the timings and voltage first thing i noticed was that the timing was set to 5-5-5-18-23, and on the box it just says 5-5-5-15, i know the last digit dont mean that much but how come the timings are set higher the it says on the modules as standard, secondly in needed to increase my voltage from 1.8 to 2.1 which is 0.3V as it also says on the modules, but in the voltage control there was no 0.3v option only 0.300v, and the numbers was written in a light red tone, not deep red. which made me slightly nervous, but so far everything is running fine, but i'd still like to hear from someone that what i've done i correct and what the deal with those timings are.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...