Jump to content
Corsair Community

ASUS P4C800-E Deluxe Dual Channel problem?


jasper

Recommended Posts

Hello, I bought the Corsair TWINX1024-3200C2 1GB DDR400 XMS3200 Dual-Channel Memory and I am having a problem getting them to work at the advertised timing (2-3-3-6) in dual channel mode. I have no problem running at 2.5-3-3-6 in dual channel mode nor do I have a problem running the sticks individually at 2-3-3-6. Does/Did anyone else have this problem? My test setup is described below. Thanks in advance. Software Test Program: Memtest-86 v3.1 CPU: Intel Pentium 4 3.0C Motherboard: Asus P4C800-E Deluxe BIOS ver. 1016.001 AI Overclock Tuner: Standard FSB: 200MHz Perfomance Mode: Auto DDR Reference Voltage: Auto (tried 2.75 volts as well) Performance Acceleration Mode: Auto Video Card: ATI AIW 9600 Hard Disk: Seagate Barracudda SATA 120GB Optical: Sony DWU-14A DVD+-RW NOTE: Memtest reported errors for Test #5. Sticks were tested in slots 1/3 and 2/4.
Link to comment
Share on other sites

Thanks for responding RAM GUY... The test configurations are listed below. Disabled USB Legacy Support Timing: 2-3-3-6 DDR Reference Voltage: Auto 1) stick #1, slot #1 - no errors 2) stick #2 slot #1 - no errors 3) stick #1 slot #3 - no errors 4) stick #2 slot #3 - test #5 errors 5) stick #1 slot #3 and stick #2 slot #1 (dual channel) - no errors. Any idea why test configuration 4) is a problem? I'm satisfied with test configuration 5) and will stick with it for now. Thanks
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...