Jump to content
Corsair Community

Problems with 2x 512mb XMS3200C2PT modules


19451979

Recommended Posts

Have had one 512mb module installed for about four months, decided to add another to go dual, when using the two modules, the system continuously reboots & Memtest+ v1.1, test 6, shows many errors after about 15 passes. Both modules work fine when used independently. The original module says V1.2 and the new one V3.1. My motherboard is an Abit IC7-G running a P4 2.8 800mhz fsb processer. Is there some incompatibility, I am running the Dimm voltage at 2.7 volts and setting at 2.5-3-3-6. My supplier will exchaged the recently purchased module but I will of course get another V3.1 in exchange. Please advise as to what to do Thanks
Link to comment
Share on other sites

  • Corsair Employees
You would neeed to use matching modules for a daul channel MB. I would try and find another use for the modules you have now and get a Twinx set instead. Or see if you can find another Rev 1.2 to match what you have now!
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...