Jump to content
Corsair Community

600Mhz FSB on Corsair CM2X1024-8500C5D


Recommended Posts

Is it Possible???

first i tried just keying in 600Mhz FSB into the BIOS and left everything else at auto... Failed to POST.(just fans span up)

so now i'm at the default speed of 533Mhz...

Timings: 5-5-5-15

Voltage: 2.1V

FSB: 533Mhz

CPU Multiplyer: 7

CPU Voltage: BIOS Setting: 1.3375V

CPU-Z reports 1.312V



I'm going up in steps of 5...

Link to comment
Share on other sites

Im confused?


FSB relates to your CPU but the way its worded it sounds like your talking about your ram speed, but then you mention your CPU multi and voltage?


Take a guess and say your talking about your ram, I have the same modules and have had little luck getting them to move past stock frequencies\timings.


From what Ive read on the subject in these forums, apparently ddr2 modules are very tightly binned now with little headroom left in the chips.


Best I got was 533Mhz @ 5-5-5-12-2T @ 2.1v's


I managed to get 600Mhz but had to back off on my timings to get it, didnt consider the tradeoff worth it.


If you are talking about your actual CPU FSB 600x4=2400FSB!!!!!!!


Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...