Jump to content
Corsair Community

Think I found it...


Recommended Posts

After trying different things with the 2 new sticks of ram that I got. I did some investigating with CPU-z. It looks like I got 2 different sticks of ram in the same package,that are tagged the same. Am I correct?


Thx Bobby





Link to comment
Share on other sites

  • Corsair Employees

It looks like the SPD was programmed incorrectly. I would manually configure the following settings in your BIOS:


Memory Frequency: 800MHz

Memory Voltage: 2.1 volts

TCL: 4


TRP: 4

TRAS: 12

Command Per Clock: 2T


Test with http://www.memtest.org to make sure you do not have any errors, and you should be fine. Otherwise we can replace the pair for you, just use the On Line RMA Request Form and we will be happy to replace them. Be sure to check the box that says “I've already spoken to Technical Support and/or RAM Guy.”

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...